How Much is HFO-1234YF Per Pound in 2018?

Well ladies and gentlemen. It’s that time of year again. Thanksgiving has passed and now we’re a few days into December. I’ve got most of my gifts purchased already and am nearly done with shopping. Now, I know that the majority of you who are reading this article are going to be reading this in the heat of summer next year but it’s always best practice to take a step back and look at market pricing in the dead of winter.

Obviously, winter is the slowest time for the refrigerant business. No one is using their air conditioners so even if there is a leak on the unit no one will notice until the first hot days of April and May. This lack of demand causes the prices to drop and allows us to take a analytical look at pricing and what it will be during next year’s summer months.

As some of you may already know over the past few years I have taken the time in December to do a variety of refrigerant pricing per pound articles. The first article I did in 2015 was met with amazing success and recognition. Every year since then it has become a kind of tradition to do these articles.

Now, before we dive into this article I will warn you now that this may be a long winded post and if you are in a hurry with the contractor standing over you shoulder I suggest you scroll down and look for the bold text. That will give you the breakdown that you need. If you’re here to read the article in full than by all means read on my friend.

Know This Before Purchasing

The information that I am going to give you in this article is the exact price per pound that your contractor or your mechanic is paying. Now, we may be off by a few dollars here and there depending on when they bought their product but we are more or less right in line with their cost.

There is a fine line to walk here as you are paying your contractor or mechanic for not only their labor but also for their expertise. Do you know how to flush the system? Do you know what refrigerants can be vented and which cannot? In some instances you may not even legally be able to buy the type of refrigerant that you need. In fact as of January 1st, 2018 you will need to be certified with the EPA to purchase HFC refrigerants such as R-410A, R-404A, and R-134a. This is different from previous years where you could buy HFCs without certification. HCFCs, like R-22, you will need to be 608 certified to purchase or handle the refrigerant.

While you may have your contractor’s cost you also need to use the consideration and the common decency to accept their mark up. They need to make a living just as much as you do. The balancing act here is determining what is a fair mark up and what is price gouging. It is up to you to walk that line and negotiate the best price. All I’m here for is to give you the information.

Your AC Unit is a Closed System

Before your purchase any refrigerant either for yourself or from a contractor you need to realize that the refrigerant in your air conditioning unit is in a closed system. What that means is that the refrigerant is an endless cycle from gas to liquid from liquid to gas. This cycle repeats forever as shown in the below picture.

Refrigerant Cycle in a Closed System
Refrigerant Cycle in a Closed System

If you find that your unit is low on refrigerant or is completely out do NOT just refill your machine with a new refrigerant. I repeat do NOT do this. Your system does not need a top off. It does not need just a little bit more refrigerant to get by. No. If you are running out of refrigerant that means that somewhere in the refrigerant cycle there is a leak. Your unit is leaking refrigerant and will continue to leak refrigerant until a repair is made. If you dump more refrigerant into it without fixing the leak you are literally throwing money down the drain. Potentially a lot of money too if yours is an R-22 unit.

I like to think of it as a above ground pool. If you get a puncture in the pool lining water will leak out. Sure you can always add more water but it’s not fixing the problem. Adding more refrigerant doesn’t fix the problem either. It’s just prolong the inevitable and wasting money. This works the same rather it is a home air conditioner or the air conditioning system on your F-150.

HFO-1234yf Refrigerant Price Per Pound 2018

Let’s get down to business. Much like I did for previous articles I am going to defer to Amazon and E-Bay to get my price average on a ten cylinder of R-1234yf refrigerant. As I write this in December 2017 the price looks to be between $700-$750 per ten pound cylinder. For argument’s sake I’m going to use the highest cost, $725. Let’s do the math together:

$725 / 10 pounds of refrigerant per cylinder = $72.50 per pound of HFO-1234YF

Each car is different on how many pounds of refrigerant they require. Some only require one pound and others upwards of eight to nine pounds. It is always best to check your owner’s manual or your dealership to see how much you need. In our example we’re going to call it three pounds of refrigerant to get a complete fill up of your vehicle.

3 pounds of refrigerant * $72.50 per pound = $217.50 for a complete fill up.

Now, please keep in mind that these prices CAN change.

Remember, Mechanics Need Money Too

Ok, so we’ve got our numbers. If you are a do-it-yourselfer than you know how to take it from here. However, if you are taking your car into a shop to be worked on the thing that you need to remember is that $72.50 per pound is very nearly, or is, your mechanic’s cost. You are paying your mechanic or dealership for not only their labor but also for their expertise. Expect markup. Do NOT expect to pay $72.50 per pound. They deserve to be paid for their knowledge.

The goal of this article is two things:

  • If you are a small business, or do-it-yourselfer, this gives you the average price of 1234YF and an option to purchase it on E-Bay .
  • If you are having your car worked on at a dealership or a shop than this article gives you the knowledge to negotiate the price of your refrigerant down to a manageable markup. While you may not pay $72.50 per pound you will be able to recognize a gouge if they charge you $300 or $400 a pound.

Conclusion

In conclusion 1234YF is here to stay. I would like to say that the high price tag of $725 for a ten pound cylinder is going to come down but to be honest over the past few years the price has stayed consistent. The days of cheap refrigerant may be over as we transition away from HFCs and over to the new HFO class of refrigerants. The hope that is as HFOs become more and more popular that the price begins to fall.